Assembling The Slicer/Shredder - Emeril Lagasse Pasta & Beyond PM-01 Owner's Manual

Parts & Accessories
Assembling the Slicer and Shredder Housing
1. Attach the Shredder Housing (Q) by pushing
it into the matching slots on the Basic Unit
Housing (A). See notes in "Main Unit Housing
Backplate" section for assembly.
2. Select either the Slicer Blade (S) or the Shredder
Blade (T) and insert the blade onto the three
fins at the back of the Shredder Housing. While
holding the Outer Tab, rotate the blade so it
locks into the housing.
SLICER/SHREDDER PARTS
A Basic Unit Housing
Q Shredder Housing
R Pusher
NOTE: All slicer parts are marked with an "S" to
identify which parts are used for slicing. The parts of
each housing are also color coded to help you identify
which parts are used with which housing.
Outer Tab*
Use the tab to twist the Slicer or Shredder
Blade to lock and unlock. Do not put your
finger into the blades to remove because
the blades are sharp.
12
Emeril Lagasse Pasta & Beyond
S Slicer Blade
T Shredder Blade
T
™
3. Place the Food and Pulp Collector where food
will exit the appliance.
4. Remove the blade prior to removing the housing.
CAUTION: To avoid personal injury, do not grip
the sharp parts of the blades.
R
Q
S
A