Assembling The Meat Grinder - Emeril Lagasse Pasta & Beyond PM-01 Owner's Manual

Parts & Accessories
Assembling the Meat Grinder Housing
1. Attach the Grinder Housing (J) by pushing it into
the matching slots on the Basic Unit Housing
(A). See notes in "Main Unit Housing Backplate"
section for assembly.
2. Slide the Auger (M) through the Grinder Housing
into the shaft portal in the Basic Unit Housing.
3. Fit the Grinder Blade (N) in place on the front of
the Auger shaft. Face the Grinder Blade with the
sharp edges facing toward the Grinder Plate (O).
Fit the Grinder Plate to the tip of the Auger
shaft and secure in place by setting the Grinder
Plate tabs into the slots on the front of the
Grinder Housing.
MEAT GRINDER PARTS
A Basic Unit Housing
J
Grinder Housing
K Chute/Tray
L Pusher
NOTE: All meat grinder parts are marked with
an "M" to identify which attachments are used for
meat grinding. The parts of each housing are also
color coded to help you identify which parts are
used with which housing.
P
M Auger
N Grinder Blade
O Grinder Plate
P Extrusion Cap
O
M
N
4. Secure everything in place by screwing the
Extrusion Cap (P) on the threads on front of the
Grinder Housing.
5. Remove the black storage tray from the Basic
Unit Housing and replace it with Food & Pulp
Collector when grinding meat.
6. Use the Pusher (L) to feed meat into the grinder.
L
K
J
A
11
Emeril Lagasse Pasta & Beyond
™