Stihl HTA 66 Instruction Manual page 46

English
1 Chain scabbard
The chain scabbard protects from contact with the saw
chain.
2 Handle hose
For holding and controlling the pole pruner.
3 Shaft
The shaft connects all components.
4 Oil tank cap
The oil filler cap closes the oil tank.
5 Battery compartment
The battery compartment holds the battery.
6 Control handle
For holding and controlling the pole pruner.
7 Ergo lever
The Ergo lever holds the release slide in position when
the trigger is released.
8 Release slide
The release slide releases the trigger.
9 Carrying ring
For attaching the carrying system to the brushcutter.
10 Trigger
Switches the pole pruner on and off.
11 Locking lever
The locking lever holds the battery in the battery
compartment.
12 Chain sprocket
The chain sprocket drives the saw chain.
13 Tensioning screw
Adjusts the chain tension.
14 Guide bar
The guide bar supports and guides the saw chain.
15 Saw chain
The saw chain cuts the wood.
44
16 Limit stop
Holds the pole pruner against the wood while cutting.
17 Chain sprocket cover
Covers the chain sprocket and secures the guide bar to
the pole pruner.
18 Nut
Secures the chain sprocket cover to the pole pruner.
19 LEDs
The LEDs indicate the state of charge of the battery and
any faults.
20 Battery
Supplies power to the pole pruner.
21 Button
The button activates the LEDs on the battery.
# Rating plate with machine number
3 Overview
0458-191-9621-A