Spark Plug Dismantlement - Gilera Runner 125 Manual

Rear tyre
TYRE INFLATION PRESSURE
Front tyre pressure
Rear tyre pressure
Tubeless, 140/60 - 13'' 63P
1.8 bar
2.2 bar

Spark plug dismantlement (03_09, 03_10, 03_11)

Remove one of the two sides of the footrest, unscrewing the four fastening screws,
one of which is under the passenger footrest.
Detach the spark plug shielded cap and remove the plug with the box-spanner sup-
plied.
To reinstall it, screw in the spark plug by hand, setting it at the necessary angle; Use
the wrench only to fasten it. Carefully reinsert the screening hood.
When refitting, use caution while inserting the passenger footrest in its hole in side-
03_09
panel, then tighten the four screws manually.
CAUTION
FOLLOW THESE PROCEDURES VERY CAREFULLY TO AVOID ANY SEVERE
DAMAGE THAT MAY BE CAUSED BY THE VERY POWERFUL IGNITION SYS-
TEM.
03_10
41