Alcad GRF-200 Manual page 15

Remove the caps and the fixing pins from the
flush-mounted box. Choose the two fixing pins
you want to hinge the panel on to, so that it opens
either to the right or to the left or downwards.
Make the electrical connections. See wired
diagrams.
D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S
Place the rings of the panel over the extracted
fixing pins. The unused pins should be placed in
their slots.
Once the connection of the other components of
the installation have been made and the monitor
mounted on the connections bracket, you will be
able to make calls. Now adjust the entrance panel.
See page 21.