Axis 292 User Manual page 7

Control Button - Press this button to restore the factory default settings, as described on
page 26.
Video Select Button - When in manual mode, pressing this button connects to the next
video source. In auto mode, the button pauses/resumes the automatic cycling of the video
sources. If the AXIS 292 is disconnected, pressing the button makes the unit connect to the
first encoder in the video source list, in both manual and auto mode.
Notes:
•If the Motion JPEG settings in a connected video encoder are changed, you must disconnect and then
reconnect that video source for the settings to take effect.
•Holding the video select button pressed for 2 seconds will disconnect the unit.
AXIS 292 Rear Panel
Network Connector - The AXIS 292 connects to the network via a standard CAT-5
network cable connected to the RJ-45 connector on the rear panel. The speed of the local
network segment (10BaseT/100BaseTX Ethernet) is automatically detected.
Video Connectors
• RCA - Standard phono-type connector for composite video in PAL/NTSC. Allows
direct connection of an analog TV device.
• BNC - Coaxial BNC connector for composite video in PAL/NTSC. Allows direct
connection of an analog TV device.
• Y/C - Mini-DIN connector for S-Video in PAL/NTSC. Allows direct connection of
an analog TV device.
Note:
The RCA and BNC connectors should not be used simultaneously. The Y/C connector can be used simulta-
neously with any one of the other connectors.
Audio Output - Analog stereo audio with Line levels. Allows connection to external audio
equipment.
Power Connector - Socket for connection of the PS-K power adapter.
RCA BNC
AXIS 292 - Product Description
Y/C
7