Axis 292 User Manual page 12

AXIS 292 - Installing the AXIS 292
12
Manual Installation using ARP and Ping in UNIX/Linux
Assign your product with a unique IP address from a computer on your network, as
follows:
1. Acquire an unused IP address for the AXIS 292 from your network administrator.
The AXIS 292 must be installed on the same subnet as your computer.
2. Connect a standard network cable to the AXIS 292 and connect it to the network.
3. Locate the serial number/MAC Address (S/N) on the label on the underside of the
AXIS 292.
Syntax:
arp -s <IP Address> <MAC Address> temp
ping -s 408 <IP address>
Example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
4. Connect power to the AXIS 292.
5. Close the ARP Ping session once 'Reply from 192.168.0.125: ...' (or similar) is
displayed (approximately 10-15 seconds).
6. Start a browser and enter the IP address in the Address/Location field.
7. Press Enter.
8. Set the password for the root user (administrator).
9. The installation is now complete. Proceed to Accessing the AXIS 292, on page 13.
Notes:
•In some Unix systems, the arp command can be located in a directory that is not on the command path.
•The serial number/MAC address (S/N) is located on the label on the underside of the AXIS 292.