Axis 292 User Manual page 18

AXIS 292 - Video Sources
18
Resolution - This setting is only valid for Motion JPEG video sources. To use a resolution
other than the source's default value, check the Custom box and enter the required
resolution. If the selected resolution is not available in the encoder, the current setting will
be used instead.
The resolutions available depend on the encoder being used. Please see the encoder's
online help for the available resolutions.
Compression - This compression setting is only valid for Motion JPEG video sources. To use
a compression other than the source's default value, check the Custom box and enter a
custom compression value (0-100).
Interlace Mode - The interlace mode is only valid for Motion JPEG video sources, and is
used mainly when the video stream is from an encoder with a high resolution (e.g. 4CIF)
and an external analog camera is in use. Leave as Autodetect (recommended), or if moving
objects appear to shake, select Interlaced or Progressive (depending on the camera's mode)
to obtain a better image. See the online help for more information.
PTZ preset - If the video source has Pan/Tilt/Zoom capability, it is also possible to select a
PTZ preset position view, by entering the name of the preset here. To add new preset
positions, please refer to the manual for the video source. To check that the PTZ preset
works, click the Test button after entering the preset name. The PTZ device/camera should
then move to the selected view.