11. ELECTRICAL SPECIFICATION
The point of connection to the mains should be readily accessible and adjacent to the device.
The sensor has 2 cables leading out of
the rear of the lug; these cables should
never be extended (Unless the correct
extension cables are used.)
latching
Connection to
control module
is via 2 spade
connectors
All Performa electronic taps conform to relevant parts of the following directives:
NOTE: All electrical installations must comply
o
C.
o
o
C.
Material: ABS
The sensor has 2 cables leading out of the rear of the lug; these cables should
never be extended (Unless the correct extension cables are used.)
Solenoid
latching
Connection
Material: ABS
to control
module is
via 2 spade
type CR-P2
connectors
o
C.
o
o
C.
Output voltage
Permanent,
Box Dimension: 95