Table of Contents
Advertisement
4.
Fit rods and inlet hose through the
hose and rods.
Fit bracket (F), ensuring the
notches align with the rods.
5.
Use long clamping nuts (E) to
tap together.
Tighten using either a box spanner
or adjustable spanner. Ensure the
tap is completely secure.
6.
Sandwich the conductive ring (H)
with two brass washers (I). Secure
it using the short nut (J). This can
be mounted on either rod. Ensure
the tab (circled) on ring (H) is
accessible.
G
F
E
.
J
4
WALL / SINK
WORKTOP
SHOULD LOOK
LIKE THIS...
H
I
Advertisement
Table of Contents
