Table of Contents
Advertisement
Please note: Products that operate outside these conditions cannot be guaranteed to work/operate by the schemes
type two valve.
Please note: Products that operate outside these conditions cannot be guaranteed to work/
Please note: Products that operate outside these conditions cannot be guaranteed to work/operate by the schemes
type two valve.
operate by the schemes type two valve.
Maximum Pressure Differential 5:1
Maximum Pressure Differential 5:1
Minimum Temperature (Hot/Mixed) = 10ºC Difference
Maximum Pressure Differential 5:1
Minimum Temperature (Hot/Mixed) = 10ºC Difference
Minimum Temperature (Hot/Mixed) = 10ºC Difference
Conditions for normal use
Conditions for normal use
This Pegler Yorkshire product has been designed to function under the following conditions suitable for use as a type
Conditions for normal use
2 valve
This Pegler Yorkshire product has been designed to function under the following conditions suitable for use as a type
This Pegler Yorkshire product has been designed to function under the following conditions suitable
2 valve
for use as a type 2 valve
Pressure Drop through Shower for Correct Mixing (bar)
Pressure Drop through Shower for Correct Mixing (bar)
Maximum Static Pressure (bar)
Flow Pressure – hot and cold sides (bar)
Maximum Static Pressure (bar)
Hot Supply Temperature Range (10°C above outlet
Flow Pressure – hot and cold sides (bar)
Hot Supply Temperature Range (10°C above outlet
Cold Supply Temperature Range (°C)
Cold Supply Temperature Range (°C)
Maximum hot water supply temperature 80°C
Maximum hot water supply temperature 80°C
(A temperature of 60-65°C is recommended for ablutionary installations)
(A temperature of 60-65°C is recommended for ablutionary installations)
Maximum hot water supply temperature 80°C
(A temperature of 60-65°C is recommended for ablutionary installations)
Please note: A suitable hot water temperature control device should be installed to reduce
Please note: A suitable hot water temperature control device should be installed to reduce temperatures exceeding
temperatures exceeding the above maximum hot water supply temperature.
the above maximum hot water supply temperature.
Please note: A suitable hot water temperature control device should be installed to reduce temperatures exceeding
the above maximum hot water supply temperature.
Please note: Valves operating outside these conditions cannot be guaranteed by the Scheme to
Please note: Valves operating outside these conditions cannot be guaranteed by the Scheme to operate as Type 2
operate as Type 2 valves. For Low Pressure tub use a minimum flow pressure of 0.2 bar is required
valves. For Low Pressure tub use a minimum flow pressure of 0.2 bar is required to satisfy the flowrate requirements
Please note: Valves operating outside these conditions cannot be guaranteed by the Scheme to operate as Type 2
to satisfy the flowrate requirements of BS EN 1287.
of BS EN 1287.
valves. For Low Pressure tub use a minimum flow pressure of 0.2 bar is required to satisfy the flowrate requirements
of BS EN 1287.
The lists of abbreviations and description below are designated codes used throughout this
The lists of abbreviations and description below are designated codes used throughout this manual.
manual.
HP – High Pressure
The lists of abbreviations and description below are designated codes used throughout this manual.
HP – High Pressure
LP – Low Pressure
HP – High Pressure
LP – Low Pressure
S – Shower
LP – Low Pressure
S – Shower
T – Tub
S – Shower
T – Tub
T – Tub
T555 and T555L Dual Control Thermostatic Bath and Shower Mixers are both approved for use in the following
T555 and T555L Dual Control Thermostatic Bath and Shower Mixers are both approved for use in
designations
T555 and T555L Dual Control Thermostatic Bath and Shower Mixers are both approved for use in the following
the following designations
designations
TMV2 Approval Certificate Number: BC480/0509
TMV2 Approval Certificate Number: BC480/0509
WRAS Approval Certificate Number: 0907039
TMV2 Approval Certificate Number: BC480/0509
WRAS Approval Certificate Number: 0907039
WRAS Approval Certificate Number: 0907039
Product Specification
Product Specification
Product Specification
T555 Dual Control Thermostatic Bath and Shower Mixer
T555 Dual Control Thermostatic Bath and Shower Mixer
T555 Dual Control Thermostatic Bath and Shower Mixer
Pre-Installation Checks
Pre-Installation Checks
Pre-Installation Checks
When planning the plumbing for your Bath and Shower Mixer installation, it is recommended that the following
When planning the plumbing for your Bath and Shower Mixer installation, it is recommended that
checks are undertaken
When planning the plumbing for your Bath and Shower Mixer installation, it is recommended that the following
the following checks are undertaken
The products are supplied with the hot inlet on the left and cold on the right when viewed from the front. The
checks are undertaken
•
• The products are supplied with the hot inlet on the left and cold on the right when viewed from
connection of hot and cold water must be supplied to the appropriate inlet for these products to work
•
The products are supplied with the hot inlet on the left and cold on the right when viewed from the front. The
the front. The connection of hot and cold water must be supplied to the appropriate inlet for
correctly (the hot side is marked with red mark and the cold with blue!)
connection of hot and cold water must be supplied to the appropriate inlet for these products to work
these products to work correctly (the hot side is marked with red mark and the cold with blue!)
•
Ensure all pipe work has been thoroughly flushed before any installation takes place. Any debris in the
correctly (the hot side is marked with red mark and the cold with blue!)
• Ensure all pipe work has been thoroughly flushed before any installation takes place. Any debris
system will impact on the taps performance and may void warranty.
•
Ensure all pipe work has been thoroughly flushed before any installation takes place. Any debris in the
•
in the system will impact on the taps performance and may void warranty.
Ensure that there is sufficient space to install the product without hampering its operation.
system will impact on the taps performance and may void warranty.
•
The levers are fixed by a screw located under the coloured indice on top of the levers. Access to this is
•
Ensure that there is sufficient space to install the product without hampering its operation.
• Ensure that there is sufficient space to install the product without hampering its operation.
required for removing both handles during maintenance and servicing
•
The levers are fixed by a screw located under the coloured indice on top of the levers. Access to this is
• The levers are fixed by a screw located under the coloured indice on top of the levers. Access to
required for removing both handles during maintenance and servicing
this is required for removing both handles during maintenance and servicing
• The T555 should be installed in such a position that maintenance of the Bath and Shower Mixer
as well as its valves for commissioning and testing can be undertaken.
temperature)
temperature)
Code
Code
HP-S
HP-S
HP-T
HP-T
LP-S
LP-S
LP-T
LP-T
High Pressure
High Pressure
Equal to or less
Equal to or less
Operating Pressure
Operating Pressure
High Pressure
High Pressure
High Pressure
High Pressure
Low Pressure
Low Pressure
Low Pressure
Low Pressure
5
Low Pressure
0.1 to 5
Low Pressure
0.1 to 5
0.1 to 5
10
0.1 to 5
10
0.5 to 5
10
0.1 to 1
10
55 to 65
0.5 to 5
55 to 65
0.1 to 1
55 to 65
55 to 65
Equal to or less
than 25
than 25
Equal to or less
than 25
than 25
Application
Application
Shower
Bath Tub
Shower
Bath Tub
Shower
Bath Tub
Shower
Bath Tub
5
5
Advertisement
Table of Contents
