Sunrise Internet Box User Manual page 93

Field
Status
Enable
xGHz
Wireless
SSID
Visible
Channel selection
QR code
The QR code is used to let users connect to your wireless network easily as no
Objective:
password typing is required. Users will need to have a barcode reader on their devices.
The QR code can be flashed from the web interface or on the label located below the gateway.
Example below is for illustration purposes only:
To use them, you simply open a QR code reader application on your device (smartphone, tablet,
etc.) and scan the QR code with your camera. The device then decodes the information.
Sunrise Internet Box User Manual
Status can be up or down
Click on the ON/OFF button to activate or deactivate the wireless
network. From the welcome screen, the status of the Wi-Fi networks is
indicated with the 2 following icons:
: Wi-Fi on.
: Wi-Fi off.
Note: The steady "Wi-Fi" LED on the front of the Sunrise Internet Box
shows that the wireless network (Wi-Fi) is activated.
Name of the wireless network.
You can modify the SSID of your Sunrise Internet Box.
When this box is checked, the wireless network is visible by all devices.
This is the radio channel used by the Sunrise Internet Box and its Wi-Fi
clients to communicate with each other. This channel must be the same
for the Sunrise Internet Box and all of its Wi-Fi clients.
Select the channel you want from the scroll down list.
Note: It is recommended to leave this parameter set at Auto.
If you use the QR code application for tablets or smartphones, you can
scan the QR code to facilitate the connection between your device and
the wireless network.
The QR code contains the SSID and the password of the wireless
network.
Action
Page 93