Sunrise Internet Box User Manual page 60

To configure the Trigger Port and Open Port, proceed as follows:
•
Enter the name of your own application.
•
Select the Trigger Protocol and the Open Protocol from the scroll down list
•
Fill in the Trigger From Port, Trigger To Port, Open From Port and Open To Port fields.
•
Click on the Add button.
The service is added to the list.
Note
Note
A few rules for entering values:
•
When you want to select a single port, the start port (Trigger From Port or Open From Port)
and the end port (Trigger To Port or Open To Port) must be identical.
•
When you want to select a range of ports, the start port number must be lower than the end port
number.
The following diagram contains an example:
Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of
port range 3100 to 3999 for your computer to access this service.
Page 60
From the list, you can perform the following actions:
•
•
•
Delete the rule by clicking on the
The maximum number of concurrently activated Port Triggering's is set to 50
Activate or deactivate the rule using the ON/OFF button,
Modify the rule by clicking on the
button.
button.
Sunrise Internet Box User Manual