Sunrise Internet Box User Manual page 56

Field
Enable UPnP IGD
Advertisement
period
Advertisement
TTL
Custom
services name
Service
Protocol
External host
External port
Internal host
Internal port
Proceed as follows:
•
Select the service of your choice from the scroll down list, for example "SNMP."
The External Port, Internal Port and Protocol fields (transport protocol associated with this
service) are automatically filled in the table.
The External host and Internal host fields must be filled manually.
or
•
Select Other, enter the name of the server you want to connect to in the field, then:
Complete the ID Host of your computer's IP address (this is attributed by your Sunrise
-
Internet Box's DHCP server).
Fill in the External Port, Internal Port, External host and Internal host and Protocol
-
fields.
Note
Page 56
Press the ON/OFF button to activate or deactivate the UPnP
protocol. The UPnP IGD function lets your LAN devices open ports
dynamically.
The Advertisement period is how often the router will advertise
(broadcast) its UPnP information.
Advertisement Time To Live is the time to live for the advertisement. It
is measured in hops (steps) for each UPnP packet sent.
Name you want to allocate to the service when you choose Other in
the field Service.
Select a Service: Service available over Internet (such as, for
example FTP, HTTP, SMTP, etc.).
You can select Other to define a customized service. In this case, you
must fill in all fields manually.
Transport protocol (TCP, UDP, TCP/UDP, etc.).
This field can stay empty or you can enter 0.0.0.0 or WAN IP address.
Enter a port value between 2 and 65535.
Enter the IP address of your LAN device (IP address in the configured
DHCP subnet) to which the port will be forwarded.
Enter a port value between 2 and 65535.
The operation with 50 Port Forwarding's was successfully tested.
Meaning
Sunrise Internet Box User Manual