Sunrise Internet Box User Manual page 15

LED
Wi-Fi
2.4 G
or
5 G
USB
TV
Sunrise Internet Box User Manual
Status
Steady
Blinking
Off
Off
Steady
Steady
Off
Off
Blinking
Steady
Wi-Fi enabled
a) If the Wi-Fi LED is blinking during operation, the following
measures - in the order described here - may help to solve
the problem:
1. try to optimize the position of the Internet Box: free-
standing, away from microwave ovens or other
sources of interference such as aquariums, baby
monitors or radiators
2. switch Wi-Fi off and on again (see chapter 2.1.1 "Wi-
Fi")
3. change the 2.4 GHz Wi-Fi radio channel to "AUTO"
(see chapter 3.7.1 Basic)
4. restart the Internet Box (see Appendix A.6)
5. Reset the Internet Box to factory settings (see chapter
2.1.1 "Reset")
b) After Long Press of the Wi-Fi button or starting Easy
Pairing (WPS) from the user interface:
Easy-Pairing (WPS) is active (also for pairing with Sunrise
TV Box UHD)
Wi-Fi disabled
No USB device
USB device connected
Set Top Box connected via Ethernet cable
Set Top Box paired via Wi-Fi 5GHz
Set Top Box is turned off or there is no TV service activated
Power off or normal operation
•
Firmware upgrade and service from Sunrise ongoing or
•
while the reset button is pressed.
The device is rebooting by user's request.
Meaning
Page 15