Toro 140-8016 Installation Instructions Manual page 9

Procedure
Note:
All holes exist in the mower deck for installing the new baffles.
1. Install the right baffle into the deck
2. Loosely secure the right baffle to the top of the deck using 2 bolts (1/2 x 1 inch), 2 tapping bolts (3/8 x 1
inch), 2 nuts (1/2 inch), 2 washers (1/2 inch), and 2 flange nuts (3/8 inch) as shown in
3. Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in Figure 4.
4. Install the left baffle into the deck
5. Loosely secure the left baffle to the top of the deck using 3 tapping bolts (3/8 x 1 inch) and 3 flange
nuts (3/8 inch) as shown in
6. Loosely secure the left baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in Figure 4.
7. Tighten the bolts then the nuts.
1. Bolt (1/2 x 1 inch)
2. Tapping bolt (3/8 x 1 inch)
3. Washer (1/2 inch)
4. Nut (1/2 inch)
5. Flange nut (3/8 inch)
(Figure 4).
(Figure 4).
Figure 4.
Figure 4
10. Right baffle
9
6. Left baffle
7. Bolt (3/8 x 1 inch)
8. Nut (3/8 inch)
9. Rear baffle
Figure 4.
g316077