Procedure
Note:
All holes exist in the mower deck for installing the new baffles.
1.
Install the right baffle into the deck
2.
Loosely secure the right baffle to the top of the deck using 1 bolt (1/2 x 1 inch), 2 tapping bolts (3/8 x 1
inch), 1 nut (1/2 inch), 1 washer (1/2 inch), and 2 flange nuts (3/8 inch) as shown in
3.
Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in
Figure
2.
4.
Install the left baffle into the deck
5.
Loosely secure the left baffle to the top of the deck using 3 tapping bolts (3/8 x 1 inch) and 3 flange
nuts (3/8 inch) as shown in
6.
Loosely secure the left baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in
Figure
2.
7.
Tighten the bolts then the nuts.
1. Tapping bolt (3/8 x 1 inch)
2. Washer (1/2 inch)
3. Nut (1/2 inch)
4. Flange nut (3/8 inch)
5. Left baffle
(Figure
2).
(Figure
2).
Figure
2.
Figure 2
10. Bolt (1/2 x 1 inch)
5
6. Bolt (3/8 x 1 inch)
7. Nut (3/8 inch)
8. Rear baffle
9. Right baffle
Figure
2.
g316032