General Safety Instructions - LaserLiner CondenseSpot Pro Manual

Hide thumbs Also See for CondenseSpot Pro:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed
on together with the device.
Function/Application
The CondenseSpot Pro is an infrared temperature measuring device with integrated hygrometer and a
Bluetooth
interface for transferring measured data. Non-contact temperature measurement of surfaces
®*
is realised by measuring and evaluating the amount of electromagnetic energy in the infrared wavelength
range. The device can also be used to measure all relevant climate data and calculate the dew point. This
makes it possible to assess thermal bridges and condensation moisture.

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope
of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– When using the device outdoors, make sure that the weather conditions are appropriate and/or that
suitable protection measures are taken.
– Please ensure compliance with the safety regulations set out by local and national authorities
with regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
EN 60825-1:2014/AC:2017
– Attention: Do not look into the direct or
reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical
instruments (magnifying glass, microscope,
binoculars)
– Do not use the laser at eye level (1.40...1.90 m)
– Tampering with (making changes to) the
laser device is not permitted.
10
EN
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
Laser outlet
Laser warning message

Advertisement

Table of Contents
loading

Table of Contents