Data Transfer - LaserLiner CondenseSpot Pro Manual

10
Thermal bridge warning
In relation to buildings, the term thermal bridge refers to an area, e.g. an inside wall,
at which heat is transferred outwards faster than at the rest of the inside wall. When
viewed from the inside, the temperature of this area is lower than the surrounding
areas and when viewed from outside higher than the surrounding areas. This often
indicates faulty or inadequate insulation.
For this purpose, the CondenseSpot Pro compares the ambient temperature with the surface temperature.
If there are large differences in both temperatures, the device will trigger warnings in 2 stages:
The " " symbol flashes at the threshold or the display illumination changes to 'blue' or 'red' if the
differential is significant.
Ambient temperature/
surface temperature
differential: < 3.5°C
no thermal bridge
The visual and acoustic signals can be turned off by pressing the alarm function button (3).
The symbols " " (m) and "

Data transfer

The device features a Bluetooth
a Bluetooth interface (such as a smartphone or tablet).
®*
The system prerequisites for a Bluetooth
http://laserliner.com/info?an=ble
The device can set up a Bluetooth
The range is set to a maximum distance of 10 m from the terminal device and greatly depends on
the ambient conditions such as the thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Once it has been activated, Bluetooth
with exceptionally low power consumption.
A mobile device can link up to the active measuring device via an app.
Application (app)
An app is required to use the Bluetooth
stores for the specific type of terminal device:
16
EN
Ambient temperature/surfa-
ce temperature differential.:
≥ 3.5°C possible thermal
bridge, the " " flashes,
check area again
" (n) indicate whether the alarm function is active or not.
function that enables wireless data transfer to mobile devices with
®*
connection are specified at
®*
connection with Bluetooth 4.0 compatible devices.
®*
remains switched on indefinitely as the radio system is designed
®*
function. You can download the app from the corresponding
®*
Ambient temperature/
surface temperature
differential: ≥ 6.5°C thermal
bridge, Blue display and
the " " symbol flashesl
Ambient temperature/surfa-
ce temperature differential:
≥ -6.5°C thermal bridge,
Red display and the " "
symbol flashes