Waterous AQUIS ULTRAFLOW Installation And Operation Manual page 26

Safety Introduction
Connecting to the Tellurus HMI—External Keyboard and USB Drive
Product Overview
1
3
2
|
26
Installation
Use the illustration and instructions to connect to
the Tellurus HMI with a keyboard and USB drive.
Use the USB drive to download and save the
current configuration file or to upload a new or
restore to a previous configuration.
To transfer configuration files, you will need the
following:
• A USB hub to connect the HMI to the keyboard
and USB drive.
• A USB keyboard to navigate through the menu.
• A USB drive to store and retrieve configuration
files.
Note: Only use components with a USB standard of
1 Plug in the USB hub to the USB connection on
the HMI.
2 Plug-in the USB drive to the USB hub if you are
transferring files.
3 Plug-in the USB keyboard and mouse to the
USB hub.
56
Operation
2.0 or higher.