Enabling And Disabling A Dla-Screen Views - Waterous AQUIS ULTRAFLOW Installation And Operation Manual

Safety Introduction
Enabling and Disabling a DLA—Screen Views
1 #1 / #2
PASSENGER 2~1/2"
#1 / #2 DRIVER
2~1/2"
#1 / #2 PASSENGER 2~1/2"
111.2
11.3
DECK GUN 8"
298.5
75
#1 / #2 DRIVER 2~1/2"
524.7
11.3
< SOLUTION
#1 / #2
PASSENGER 2~1/2"
#1 / #2 DRIVER
2~1/2"
CONCENTRATE
111.2
< SYSTEM
Product Overview
PASSENGER 6"
FRONT / REAR
DECK GUN 8"
CROSSLAY 1~3/4"
DRIVER 6"
PASSENGER 6"
3708 89.2 2972
2
375 37.5 1250
FRONT / REAR CROSSLAY 1~3/4"
9950 136.9 4563
2500 3 100
DRIVER 6"
17491 151.1 5038
375 37.5 1250
PASSENGER 6"
FRONT / REAR
DECK GUN 8"
CROSSLAY 1~3/4"
DRIVER 6"
#1 / #2 PASSENGER 2.5"
3
GAL
11.3
PRESSURE
RELIEF
112.0
3.0
CONCENTRATE ON
Installation
REAR PASSENGER
2~1/2"
REAR DRIVER /
DECK GUN 5"
REAR PASSENGER 2~1/2"
603 20102
11.3 375
REAR DRIVER / DECK GUN 5"
306 10201
30 1000
SYSTEM >
REAR PASSENGER
2~1/2"
3708
GAL
GPM
375
4
GAUGE >
|
44 56
Operation Maintenance
Use the illustrations and instructions to enable and
disable a discharge. A discharge consists of a DLA
and dedicated waterline from the fire pump.
Enabling a discharge on the screen enables the
associated DLA that is then activated by flowing
water through the dedicated waterline. After start-
up, the system opens to the DLA Gauge screen.
1 The gauge screen displays the available
discharges, their status, and their statistics
since panel power-up. Enable and disable any
discharge by doing the following:
• Long-press any DLA button to enable that
DLA. The button appearance changes to
indicate that the DLA is enabled. A border
appears around the button, and the DLA
name animates when the DLA is active.
• Long-pressing an enabled DLA disables that
DLA, and reverts the button to its original
appearance.
• Short-press any DLA button from any screen
to navigate to the solution screen for that
DLA.
2 The DLA information box updates to show the
status, and the associated statistics update
when it is active.
3 The concentrate source icon animates on the
solution screen for any DLA that is enabled.
4 Another indication that the DLA is enabled is
that the Concentrate On/Off is in the On
state. Press the Concentrate On/Off button
to disable that DLA.