Command Interface Menu - Waterous AQUIS ULTRAFLOW Installation And Operation Manual

Safety Introduction

Command Interface Menu

Most commonly used configuration commands are available through the shortcuts on the desktop. Additional commands are available through the command
interface. Use the command interface to access the additional command functions when necessary. Review the menu description to navigate to the desired
function. Continue following the menu descriptions as you navigate to the desired setting or adjustment.
-------------------------------------------------------------------------------
****
-------------------------------------------------------------------------------
Enter any of the following commands at the prompt to perform HMI functions:
[help help] - Show command interface help
[exit exit] - Exit command interface and restart application
[operate operate] - Operating status menu
[report report] - Reporting functions menu
[service service] - Customer service menu
[config config] - Tellurus configuration menu
[maint maint] - System maintenance and diagnostics menu
[cal cal] - System calibration menu
[net net] - Network settings menu
[term term] - Open terminal command shell
[patch patch] - Apply incremental system patch files
[restart restart] - Shutdown and restart
-------------------------------------------------------------------------------
command:
Product Overview
Tellurus Command Interface Tellurus Command Interface
|
36 56
Installation Operation
****