Waterous AQUIS ULTRAFLOW Installation And Operation Manual page 23

Safety Introduction
HMI Cables and Connections
Feature Feature
1 Tellurus HMI display
2 Antenna
3 HMI cable
4 HMI M12 cable
5 Control box
6 Terminating resistor
7 HMI power cable
8 System power
Product Overview
Description Description
This displays system operation and provides operator control of the system.
This transmits and/or receives WiFi and GPS signals.
This connect the HMI to power and to the HMI M12 cable.
This connect the HMI cable to the control box.
This connects to various components in the system and contains the programmable logic controllers (PLC).
This terminates the CANbus signal.
This is the installer-supplied power cable. Refer to
This is the system power.
23
Installation
"HMI Cable" on page 18
|
56
Operation
for pin-out configuration.