BMW R nineT 2015 Rider's Manual page 74

Use rear wheel stand with rear
8
axle adapter. The rear wheel
stand and its accessories are
72
available through your autho-
rized BMW Motorrad retailer.
z
Set desired height of rear-
wheel stand using bolts 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
Push the rear-wheel stand from
the right onto the rear axle.
Apply the retaining disk from
the left; to do so, press the un-
lock button.
ATTENTION
Motorcycle tips to the side
when raising.
Component damage cause by
tipping over.
Secure the motorcycle against
tipping to the side, preferably
with the assistance of a second
person.
Position motorcycle upright
while simultaneously pressing
grip of stand back so that both
stand rollers rest on ground.
Then press the grip down to
the ground.