BMW R nineT 2015 Rider's Manual page 77

Visually inspect left and right
brake pads to determine their
thickness. Viewing direction:
between wheel and front
suspension toward brake
pads 1.
Front brake-pad wear
limit
0.04 in (1.0 mm) (Only friction
material without carrier plate.
Wear markings (grooves) must
be clearly visible.)
If the wear indicators are no
longer clearly visible:
WARNING
Dropping below the minimum
pad thickness.
Reduced braking action. Damage
to the brake.
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking rear brake pad
thickness
Make sure ground is level and
firm and park motorcycle.
8
75
z