General Instructions; Onboard Power Sockets - BMW R nineT 2015 Rider's Manual

General instructions

9
CAUTION
98
Use of products from other
manufacturers.
Safety risk
BMW Motorrad cannot exam-
ine or test each product of out-
side origin to ensure that it can
be used on or in connection
with BMW motorcycles without
constituting a safety hazard.
z
Nor is this guarantee provided
when the official approval of
a specific country has been
granted. Tests conducted by
these instances cannot make
provision for all operating con-
ditions experienced by BMW
motorcycles and, consequently,
they are not sufficient in some
circumstances.
Use only parts and accessories
approved by BMW for your
motorcycle.
The safety, operation and suit-
ability of the parts and accessory
products have been checked ex-
tensively by BMW. Therefore,
BMW assumes responsibility for
these products. BMW shall not
be liable for unapproved parts
and accessory products of any
kind.
Whenever you are planning mod-
ifications, comply with all the le-
gal requirements. The vehicle
must not violate the regulations
governing vehicle approval for
highway use applicable in your
own country.
Your authorized BMW Motorrad
retailer offers you qualified advice
in choosing genuine BMW parts,
accessories and other products.
You will find all BMW Motorrad
optional accessories on
our website: "www.bmw-
motorrad.com".

Onboard power sockets

Information on using onboard
power sockets:
Automatic deactivation
The power sockets are automat-
ically deactivated under the fol-
lowing conditions:
if the battery's voltage falls be-
low the level required to start
the vehicle
if the maximum electrical load
specified in the "Technical
data" is exceeded
during starting.
Connection of electrical
devices
The ignition must be switched
on before electrical devices con-
nected to the power sockets can
be operated. To reduce loads on
the onboard electrical system the
sockets are deactivated no more