ATTENTION
Incorrect spacing between
the sensor ring and wheel
speed sensor caused by
poorly aligned threaded
bushing in the front
suspension.
Damage to the wheel speed sen-
sor. ABS malfunction.
The left clamp fixes the
threaded bushing in position
and must not be loosened or
removed.
Loosen axle clamping
screws 1.
Remove quick-release axle 2
while supporting wheel.
Do not wipe off grease on axle.
Roll front wheel forward to re-
move.
Remove spacing bushing 1 on
left side from front wheel hub.
Install front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS.
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning
of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
8
83
z