Axis 213; Ports & Devices - I/O Ports; Led Settings; Maintenance - Axis 213 PTZ User Manual

Notes:
•
Viewers do not need to know this IP address or port number, but simply the main IP address or host
name otherwise used for accessing the camera.
•
Setting the video port number to 0 means a random port number will be used.
If IP packets (i.e. data) fail to be delivered to their destination within a reasonable
length of time the number entered in the Time to live field tells the network routers
when to discard the packet. The value is usually measured in 'hops', i.e. the number of
network routers that can be passed before the packet arrives at its destination or is
dropped.
Ports & Devices - I/O Ports
The pinout, interface support and the control and monitoring functions are described
in the section on the Connection Module, on page 51.

LED Settings

When the LED on the front of the AXIS 213 is Enabled, the LED will remain lit when
the AXIS 213 is on and flash when there is any network activity. If Disabled, the LED
will remain off, except when there is a hardware problem and the LED will flash red.

Maintenance

• Restart - The unit is restarted without changing any of the settings. Use this
method if the unit is not behaving as expected.
• Restore - The unit is restarted and most current settings are reset to factory default
values. The settings that will not be reset are as follows:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
Default - The Factory default button should be used with caution. Pressing this button
will reset all of the AXIS 213's settings to the factory default values (including the IP
address)
Upgrade Server - See Updating the Firmware, on page 54.
AXIS 213 - System Options
47