Axis 213 PTZ User Manual page 32

AXIS 213 - Setup
32
Output Buttons - These buttons can then be used to manually start and stop an event
from the Live View page, e.g. switch a light on/off:
• The Pulse button activates the port for a defined period
• Active/Inactive displays 2 buttons, one for each action (on/off)
Default Video Format - Select default video format from the drop-down list. Check
the box to enable video format selection on the Live View Page.
Default Viewer
Microsoft Internet Explorer (IE)
When using
method of viewing moving images. The options are:
• AMC(ActiveX)- This is the best choice for fast image updating in Internet
Explorer for Windows, but might not be possible on computers that have
restriction on the installation of additional software.
• QuickTime - For use with MPEG-4 only, select this to use the QuickTime
plug-in for Microsoft Internet Explorer.
• Java applet - This alternative uses a Java applet to update the images in the
browser.
• Still Image - Displays still images only. Hit the Refresh button in your
browser to view a new image.
When using any other browser than Internet Explorer for Windows, select the
appropriate method from the drop-down list for viewing images. The available
options are similar to Internet Explorer except for Server Push. With this method, the
camera maintains and controls an open HTTP connection to the browser and sends
data as and when required for as long as required.
Please see the online help
Viewer settings
Show viewer toolbar - Uncheck to remove the viewer toolbar from the Live View
page.
Enable MPEG-4 decoder installation - enables/disables the installation of the
MPEG-4 decoder included with AMC.
Show red cross in PTZ joystick mode- enables/disables a red position indicator on
the Live VIew page when the joystick navigation mode is selected.
for Windows, select your preferred
for more information.