Axis 213 PTZ User Manual page 11

Pan/Tilt/Zoom controls
The Live View page also displays the Pan/Tilt/Zoom controls.
These are enabled/disabled for specified users by the administrator
under System Options > Security > Users > User List..
Note:
Setting the iris and focus manually will disable Auto iris/Auto focus.
The control panel
Click the Ctrl panel button to display the control panel, where
the following settings are available:
• Auto focus: Automatically adjusts the image focus.
• Auto iris: Automatically adjusts the amount of light
reaching the camera and gives the best results, This
also protects the image sensor from strong light.
• Backlight comp: Enabling backlight compensation
makes the subject clearer if the image background is
too bright, or if the subject is too dark.
• Navigation mode: "Center" will move the camera
view to center on the position that was clicked.
"Joystick" moves the camera in the direction indi-
cated by a mouse click, relative to the center of the
image. The further from the center the image is clicked, the greater the
movement.
• IR cut filter - when set to off, the camera will be able to "see" infrared
light, e.g. at night, thus making the image clearer. The image is shown in
black & white when the IR cut filter is off.
• Shortcuts - These buttons can be configured to provide direct access to
various built-in auxiliary commands provided by the PTZ driver. See
Advanced - Ctrl Panel on page 35.
AXIS 213 - Accessing the camera
11