Configuring Event Types - Axis 210A User Manual

Configuring Event
Types
An Event Type describes
how and when the camera
will perform certain actions.
Example:
If somebody passes in
front of the camera and an event that
uses motion detection has been con-
figured to act on this, the camera can
e.g. record and save images to an FTP server, and/or send a notification e-mail to a pre-configured e-mail address
with a pre-configured message. Images can be sent as e-mail attachments.
Triggered Event
A Triggered event can be activated by e.g:
• a push button connected to the camera's input port
• detected movement in a configured motion detection window
• a manually activated action, e.g. from an action button in the web interface
• on restart (reboot) after e.g. power loss
How to set up a triggered event
This example describes how to set up the camera to upload images when e.g the main door
is opened:
1. Click Add triggered on the Event types page.
2. Enter a descriptive name for the event, e.g. Main door open.
3. Set the priority - High, Normal or Low (see the online help).
4. Set min time interval between triggers - This is the minimum time period that
the event type must wait after a trigger before it will be possible to trigger it
again. The interval commences as soon as the first trigger occurs. The shortest
possible interval is 1 second and the longest is 23 hours, 59 minutes and 59
seconds. To not use a minimum interval, set this option to 00:00:00
5. Set the Respond to Trigger... parameters for when the event will be active,
e.g. only after office hours.
6. Select the trigger alternative from the Triggered by... drop-down list, e.g. select
Input ports, for a sensor connected to the door.
7. Set the When Triggered... parameters, i.e. define what the camera will do if the
main door is opened e.g., upload images to an FTP server or send an e-mail
notification.
8. Click OK to save the Event in the Event Types list.
AXIS 210A/211A - Event Configuration
35