Configuring Event Types - Axis 216FD/FD-V User Manual

Configuring Event Types

An Event Type describes how and when the camera will perform certain actions.
Example:
If somebody passes in front
of the camera and an event that uses
motion detection has been configured
to act on this, the camera can e.g.
record and save images to an FTP server,
and/or send a notification e-mail to a
pre-configured e-mail address with a
pre-configured message. Images can be
sent as e-mail attachments.
Triggered Event
A Triggered event can be
activated by e.g:
• a push button connected to the camera's input port
• detected movement in a configured motion detection window
• a manually activated action, e.g. from an action button in the web interface
• audio that is e.g. louder than a specified level
• on restart (reboot) after e.g. power loss
How to set up a triggered event
This example describes how to set up the camera to upload images when e.g the main door
is opened:
1. Click Add triggered on the Event types page.
2. Enter a descriptive name for the event, e.g. Main door open.
3. Set the priority - High, Normal or Low (see the online help).
4. Set the Respond to Trigger... parameters for when the event will be active,
e.g. only after office hours.
5. Select the trigger alternative from the Triggered by... drop-down list, e.g. select
Input ports, for a sensor connected to the door.
6. Set the When Triggered... parameters, i.e. define what the camera will do if the
main door is opened e.g., upload images to an FTP server or send an e-mail
notification.
7. Click OK to save the Event in the Event Types list.
Please see the online help
Note:
Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to upload images. Files
names can be formatted according to specific requirements. See File Naming & Date/Time Formats online help.
AXIS 216FD/FD-V - Event Configuration
for descriptions of each available option.
29