Bissell POWERCLEAN 2035 Series User Manual page 9

Cleaning the Filters
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with a damp or wet fi lter, or without fi lter or the Dirt Container in
place. Allow components to dry before reassembling the Dirt Container.
2
1
Unplug the vacuum
from the electrical
Undo the clips on
outlet and disconnect
both sides of the
the Hose.
Top Cover.
5
4
Remove the Top Cover
of drum vacuum and
grasp the plastic Filter
Then pull up to remove.
Cage, turning counter-
clockwise to unlock.
7
Once completely
dry, return Filter to
the Dirt Container.
Ensure the Filter
basket is installed
and surrounding
entire tank wall. Turn
clockwise to seal.
3
Remove the Large Fabric Filter
and hand wash in cold water with
mild detergent. Rinse well and air
dry for 24 hours.
6
Remove the Foam Filter
and rinse to clean. Allow
the filter to fully dry
before reinstalling.
8
Return the dry
Large Fabric Filter,
place vacuum Top
Cover and close
clips.
www.BISSELL.ca
9