Bissell POWERCLEAN 2035 Series User Manual page 5

Assembly (Dry Cleaning)
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
WARNING
Plastic fi lm can be dangerous. To avoid danger of su ocation, keep away from children.
2
1
Unlock the clips on the Top
Cover to remove the Hose.
Locate the Hose Connector
on end of hose and line up
Connect Hose Handle
the tab with the arrow on
to the end of the
the Suction Inlet. Insert the
Extention Wand and
hose and turn clockwise to
twist slightly to tighten.
secure.
4
Connect the Multi-Surface Floor Tool to
end of the Extension Wand and twist
slightly to tighten.
3
Connect Extensions
Wands together with
the Parking Hook on the
lower half.
Once assembled, you can store your
vacuum by inserting the Parking Hook
(located on the Extension Wand) into the
storage slot on the rear of the vacuum.
www.BISSELL.ca
5