Table of Contents
Advertisement
Assembly (Wet Cleaning)
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Locate the Hose
Connector on end of
hose and line up the
tab with the notch
on the Suction Inlet,
then insert hose end
into base.
3
Connect Extensions
Wands together with
the Parking Hook on
the lower half.
Tools
Use the Crevice Tool to reach in tight,
narrow spaces. The Crevice Tool can
also be used to pick up wet messes.
6
www.BISSELL.ca
2
Connect Hose Handle to
the end of the extention
wand and twist slightly
to tighten.
4
Attach the Wet Cleaning
Foot to the end of the
Extension Wands and
twist slightly to tighten.
Use the Dusting Brush to clean
curtains, draperies, and side tables and
window ledges.
Advertisement
Table of Contents
