Extreme Networks Extreme Management Center NMS-A-25 Installation Manual page 22

5. Other - Shows a graphical list
==========================================================
======
Enter selection [1]:
3. The Modify Settings screen summarizes the settings you have entered and provides
an opportunity to modify the settings, if desired. Enter 0 to accept the settings.
==========================================================
======
Modify Settings
==========================================================
======
All of the information needed to complete the installation of the
Extreme Management Center Engine has been entered. Enter 0 or any
key other than a valid selection to continue. If you need to make a
change, enter the appropriate number from the choices listed below.
==========================================================
======
0. Accept settings and continue
1. Set the root user password
2. Set user to run server as
3. Set hostname and network settings
4. Set SNMP settings
5. Set the system time
6. Modify all settings
Enter selection [0]:
The Extreme Management Center engine software is automatically installed. This
could take a few minutes. When the installation is complete, you'll see the
following screen:
==============================================================
===
Extreme Networks - Extreme Management Center Suite Engine - Setup
Complete
==============================================================
===
22 of 34
Configuring the Engine