Xcap Control Features; Saving Preset Settings - Raptor Photonics HAWK 252 User Manual

9. XCAP CONTROL FEATURES

XCAP has many different control functions and analytical tools that can be used when
imaging the camera. For the full XCAP user guide, please refer to the link below:
http://epixinc.com/manuals/pixci_e14el/index.htm
This section will discuss in detail a few features on XCAP that Raptor thinks would be of
immediate use when using the camera.

9.1 Saving Preset Settings

Different camera and frame grabber settings can be saved in the "Preset" tab under the
PIXCI (relevant frame grabber model number) section of the GUI, as shown in Figure 12.
Up to three different presets can be saved per settings file. If the camera is set to a desired
state outside of the default state, clicking "Save 1" will save all the current parameter states
that have been set. This can be done a further two times. These camera states can be
recalled at any time by using the recall buttons. The overall settings file can then be saved
and loaded in this tab also. Three preset states is the maximum number that can be saved in
a settings file.
Figure 15: Preset Settings.
20
HAWK-252/USER-MANUAL/REV1.0/02-20