Setting The Program; Setting The Current Day And Time; Open Window - DeLonghi KENDRA Instructions Manual

4.2.3 NIGhT/EcO
In "Night/Eco" mode the temperature set point must not be
higher than "Comfort" temperature set point. If the "Com-
fort" temperature is set below the "Night/Eco" temperature,
the latter will be automatically adjusted accordingly.
Press the "Mode" selection key until the
icon
Select the desired temperature set point by
using the "+" and "-" keys.
The use of this operating mode is recommended in night-
time hours and in case no people is in the room for more
than 2 hours.
EN
4.2.4 aNTI-FREEZE
In "Anti-freeze" mode the temperature set point is fixed at
7 °C. The appliance starts heating when room temperature
goes under 7 °C and with low energy consumption it pre-
vents the room temperature to reach the freezing point.
Press the "Mode" selection key until the
icon
This operating mode is recommended when no people is in
the room for more than 1 day.
4.2.5 chRONO
In "Chrono" mode, you can set different temperatures
("Comfort" and "Night/Eco") over a 24 hour period for each
day of the week.

SETTING ThE cuRRENT Day aND TImE

Press the "Mode" selection key until the
icon
Then press the "Mode" button again and hold
it down until the triangle indicating the day
flashes.
appears on the LCD.
appears on the LCD.
appears on the LCD.
Adjust the day of the week by using the "+"
and "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection key.
The hour starts flashing. In the same way,
adjust the hour by using the "+" and "-" keys
and confirm with "Mode" selection key.
Repeat the same procedure for the minutes.

SETTING ThE PROGRam

Now an hourly sequence can be set for each day. Start with
the first day. Choose by means of the "+" and "-" buttons, for
each hour, between the "Comfort" temperature (full bar) and
the "Night/Eco" temperature (empty bar).
T Night/Eco T Comfort
0h 2 4 6 8 10 12 14 16 18 20 22 24
Press the "Mode" key to confirm and repeat the same
procedure for each day of the week.
The weekly program is now set, the appliance emits an
acoustic signal for confirmation.
4.3 FuNcTIONS
The appliance has a number of special functions to custo-
mise and optimise use.

4.3.1 OPEN WINDOW

The "Open Window" function automatically detects the
opening of a window which is present in the proximity of
the radiator (for example during the housework) and it goes
in "Anti-freeze" mode, in order to prevent a useless heating
and save energy. The function can also detect the closing of a
window and reset the previous operating condition.
When switching the appliance on, the function is already ac-
tive, ready to detect any Open Windows.
48
T Night/Eco T Comfort