Operation And Use; Setting The Clock; Manual Functioning - DeLonghi FAN HEATER Owner's Instruction Manual

OPERATION AND USE

1) SETTING THE CLOCK

For the first time, set the clock to the correct time, proceeding as follows:
• Press the button "hour" until the display shows the hours for the correct time and AM or
PM, then release the button (fig.1).
• Press the button "min" until the display shows the minutes for the correct time, then
release the button (fig. 1).
When setting the correct time, the numbers will flash on the display.
The flashing of the numbers will continue for a few seconds after the adjustment has finished
then stops on the correct time and the clock starts working.
(Keep both pushbuttons pressed for more than 3 seconds to move through the hours and
minutes in fast mode).
To change the time, press pushbuttons "hour" for at least 5 seconds, then proceed as
above to modify both hours and minutes.

2) MANUAL FUNCTIONING

To operate the heater without timer press the "ON MODE" button. (Fig. 1). By pressing the
"ON MODE" button one or more times, the appliance will select the operating heating
power, as follows:
Fan only (summer ventilation)
4
AM AUTO
°F
O
current time room temperature
Maximum power
Medium power
Minimum power
Off
AM MAN
°F
AM MAN
°F
AM MAN
°F
AM MAN
°F
AM MAN
°F
O