Table of Contents
Advertisement
5
Technical data
Capacity
Number of chain falls
Load chain dimensions
low headroom dimension
lever force approx.
weight with standard lift, approx.
weight per add. m lift approx.
5.1
Main dimensions
dimensions
1,6 t
3,2 t
mm
A
126
159
B
187
224
C
42,5
50
D
265
415
E
137
146
F
19
24,5
G
32
39
H
335
395
6
Installation
Please observe the following points in order to avoid any damage to equipment or injury of person:
Please read chapter "Safety".
Before loading the hoist make sure the hooks are placed safely. The safety catch of the hook must be
closed.
Make sure that the fastening position cannot be changed either by the load nor by other influences.
6.1
Tools
7
Control
Only people that are familiar with the operation of the lifting devices and cranes may be entrusted with their
operation. They must be authorized by the employer for the operation of the equipment. The employer must
ensure that the operating instructions are available near the equipment and that they are accessible for the
operating personnel.
7.1
Devices from 800 kg up to 9000 kg
Before start up please make sure the free-wheeling mechanism is deactivated.
Forcible pulling may possibly close the brake and stop the chain. Should this be the case place the switching
pin in position "▼", do some lowering operation movements and begin lifting again.
Lifting or pulling
Turn the switching pin in position (1) lifting or
pulling as marked on the type plate and move the
load by operating the hand lever.
Lowering or relieving
Turn the switching pin in position (2) lowering or
relieving and move the load by operating the hand
lever.
10
1,6 t
3,2 t
1
1
mm
7,1x20,1
10 x 28,1
mm
335
395
N
340
370
kg
9
17
kg
1,1
2,3
6,3 t
9 t
217
304
224
224
60
85
415
415
146
146
34
41,5
50
72,5
540
680
6,3 t
9 t
2
3
10 x 28,1
10 x 28,1
540
680
380
390
28
42
4,7
7,0
Illustration 8
Illustration 9
5.52.159.00.01.04
Advertisement
Table of Contents
