Table of Contents
Advertisement
5.2.2
How to Operate Machine Diagnosis (Load Characteristics Measurement)
How to perform the
load characteristics measurement of the inverter in Machine Diagnosis (Load
Characteristics Measurement) screen is as below.
Example: Set "10" to [Minimum Frequency] and "60" to [Maximum Frequency] and perform the load
characteristics measurement.
(1) Set detection range frequency of load characteristics fault.
Set [Minimum Frequency] and [Maximum Frequency] to set [Frequency Domain] automatically according to
the settings.
(1)
(2) Touch [Auto measure] switch to execute the auto measure.
(2)
36/79
BCN-P5999-1305-1c
Advertisement
Table of Contents
