Advertisement
Installing the batteries
The metal detector is powered by two 9V batteries (not included).
1.
Turn off the power before installing the batteries.
2.
Slide the left and right battery covers off in the direction of the arrow.
3.
Place a 9V battery into the battery compartment matching the polarity symbols (+
and -) marked inside.
4.
Replace the covers matching B1 cover with B1 compartment and B2 cover with
compartment B2. B1 and B2 are marked in the compartments and on the covers
respectively.
WARNING:
burn them.
Cautions
Use only fresh alkaline batteries of the correct size.
Do not mix old and new batteries or different types of batteries.
Do not mix alkaline, carbon-zinc or rechargeable (nickel-cadmium) batteries.
If the unit is not in use for longer than a week, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.
Change the batteries if low battery indicator on the LCD is displayed.
Dispose of old batteries promptly and properly. Never bury or
Cover B1
Compartment B1
Compartment B2
Cover B2
Advertisement
