Advertisement
5.
Wind the search coil cable around the stem. Leave enough slack in the cable so
that it is not taut. Insert the search coil cable plug into the five-pin jack on the
control box.
6.
Turn the stem's lock nut on the middle stem clockwise until it loosens. Adjust the
stem to a length that feels comfortable when standing upright with the detector in
hand, and the search coil is level with the ground, with the carrying arm relaxed at
one's side. Rotate counter-clockwise to tighten the lock nut.
Search coil
Lower stem
Caution
Do not over-tighten the search coil or use tools such as pliers to tighten it.
The search coil's plug fits into the connector in only one way. Do not force the plug
or pull on the cable, as this could damage it.
Cable plug
Cable
Silver
button
Middle
stem
Silver button
Fixing screw
Lock nut
Upper stem
Control box
Advertisement
