Boot Setup - AVERATEC 4100 User Manual

■ Chapter 2 Bios Setup and Security Feature
LCD Enable
Backlight Disable
Saver
Bootup Enable
Beep Disable

Boot Setup

►Boot Settings Configuration
Item Selections /
Sub-menu
Quiet Boot Disabled
Enabled
►Boot Device Priority
Item Selections /
Sub-menu
Removable Dev.
1st Boot
CD/DVD
Device
Hard Drive
Realtek
Agent Disabled
2nd Boot
Device
3rd Boot
Device
4th Boot
Device
Note:
If you select Realtek Boot Agent, the system will attempt to boot from the network.
Note:
When the BIOS performs POST, you may also press F12 Key to enable the Boot Device selection menu. You may choose
CD/DVD, Hard Drive, or Realtek Boot Agent as the first storage device to boot from. If you have already connected a USB Floppy Disk
Drive before powering up, it will appear as a Removable Device in the Boot Device selection menu
[Enable]: The system automatically
reduces the LCD brightness when AC
power is removed and when the
keyboard or touchpad has been idle for
more than 10 minutes.
[Disable]: The LCD Backlight Saver
function is disabled.
Setting Bootup Beep Sound on/off
Description
[Enable]: The system will display OEM
logo instead of the POST messages.
[Disable]: The system will display POST
messages (i.e. devices information.)
Description
Set the type of device for the 1st drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, system will
Boot
attempt to load boot sector from the
Ethernet port.
Set the type of device for the 2nd drive
BIOS attempts to boot from.
Set the type of device for the 3rd drive
BIOS attempts to boot from.
Set the type of device for the 4th drive
BIOS attempts to boot from.