Graphic Subsystem - AVERATEC 4100 User Manual

■ Chapter 1 Getting to Know the Basics

Graphic Subsystem

Your computer uses a high performance 13.3" active matrix TFT panel with high resolution for comfortable
viewing.
Adjusting the Display Brightness
The notebook uses special key combinations, called hot keys, to control brightness.
Press Fn+F7 to increase the brightness.
Press Fn+F6 to decrease the brightness.
Note:
To maximize your battery operating time, set the brightness to the lowest comfortable setting, so that the internal backlight
uses less power.
Extending the Life of the TFT Display Device
Observe the following guidelines to maximize the life of the backlight in the display.
1. Set the brightness to the lowest comfortable setting (Fn+F6).
2. When working at your desk, connect your notebook to an external monitor and disable the internal
display Fn+ F5.
3. Do not disable the suspend time-outs.
4. If you are using AC power and have no external monitor attached, change to suspend mode when
not in use.
Opening and Closing the Display Panel
To open the display, lift up the lid. Then tilt it to a comfortable viewing position.
To close the display cover, fold it down gently until the LCD is in the close position.
Warning:
To avoid damaging the display, do not slam it when closing. Do not place any object on top of the computer when the
display is closed