Download Print this page

AT&T Definity 8101 Quick Reference Manual page 4

Definity communications system generic 1 and generic 3 and system 75 and generic 2 and system 85
Hide thumbs Also See for Definity 8101:

Advertisement

3 Dial call 2 (or another feature)
Note: If you hang up, call 1 sends a 3-burst priority
ring.
To put call 2 on hold and return to call 1
1 Press [ FLASH ] [recall dial tone]
2 Dial Hold code
Call 2 is put on hold, and call 1 is reconnected
Note: If you hang up, call 2 sends a 3-burst priority
ring.
To complete call 2 and return to call 1
1 After party on call 2 hangs up, hang up, receive
3-burst priority ring, and lift handset.
LEAVE WORD CALLING
To leave a message after dialing an extension
(when your call is not answered), you hear
coverage or busy tone, or you have been put on
hold
1 Press [ FLASH ] [recall dial tone]
2 Dial Leave Word Calling code
[confirmation tone]
Message light goes on at called telephone
Note: If reorder tone is heard, message is not
stored; try again.
To leave a message without ringing an extension
1 Dial Leave Word Calling code
2 Dial the extension [confirmation tone]
Message light goes on at called telephone
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX
subscriber.
1 Dial Leave Word Calling Cancel code
[dial tone]
2 Dial extension [confirmation tone]
Note: If reorder tone is heard, message is not
deleted; try again.
[ ]
[dial tone]
7
PRIORITY CALLING
To place a priority call
1 Dial Priority Calling code
2 Dial extension
SEND ALL CALLS
To send all incoming calls (except priority calls)
immediately to coverage
1 Dial Send All Calls code
[confirmation tone]
2 Hang up
To cancel Send All Calls
1 Dial Send All Calls Cancel code
[confirmation tone]
Your calls will ring at your own telephone again
TRANSFER
To send present call to another extension or
outside number
1 Press [ FLASH ] [recall dial tone]
Present call is put on hold
2
Dial number that call is to be transferred to
[ringback tone]
Remain on line and announce call; if number
dialed is busy or not answered, press [ FLASH ]
twice to return to held call
3
Hang up
Transfer is completed
AT&T
Prepared by
AT&T GBCS Product Documentation
Development
Middletown, NJ 07748-1998
Issue 1, December 1993
[ ]
[dial tone]
[ ]
[ ]
©1993 AT&T
All Rights Reserved
Printed in USA
8

Advertisement

loading

This manual is also suitable for:

Definity 8102Definity 8110Definity 8102Definity 8110