Note: You can place only one Automatic Callback
call at a time, and Automatic Callback is canceled
after 30 minutes or if the callback call is
unanswered.
To cancel an Automatic Callback request
1 Dial Automatic Callback Cancel code
[confirmation tone]
CALL FORWARDING ALL CALLS
To temporarily redirect all calls to an extension or
outside number of your choice
1 Dial Call Forward code
Version Note: If you are using System 75,
Version 3, or DEFINITY Generic 1, dial the
extension number whose calls are to be forwarded,
although you must first have console permission.
Dial extension or number where calls will be sent
2
[confirmation tone]
Version Note: If you are using System 75,
Version 1, calls can be forwarded only to another
extension, not to an outside number.
3
Hang up
Note: If you are still by your telephone, you may
hear a ring-ping tone as each call is forwarded.
To cancel Call Forwarding
1 Dial Call Forward Cancel code
(confirmation tone)
Your calls will ring at your own telephone again
CALL PARK
To park a call at your extension (for retrieval at
extension)
Press [ FLASH ] [recall dial tone]
1
2
Dial Call Park code
Call is parked at your extension
Note: To return to the parked call before you hang
up, press [ FLASH ] again.
3
Hang up
[dial tone].
[ ]
[confirmation tone]
3
To retrieve parked call from any extension
1 Dial Answer Back code
2 Dial the extension where call is parked
[confirmation tone]
If you are returning to a call parked at your
telephone, dial your own extension
You are connected to parked call
Note: If you receive intercept tone, the parked call
[ ]
has been disconnected or retrieved by someone
else.
CALL PICKUP
To answer a call to a member of your pickup group
when your telephone is idle
1 Dial Call Pickup code
You are connected to ringing call.
To pick up a call while you are active on another
call
1 Press [ FLASH ] [recall dial tone]
2 Dial Hold code
Present call is put on hold
3 Dial Call Pickup code
You are connected to call
To return to a held call
1 Complete present call and hang up
Held call sends a 3-burst priority ring
2 Lift handset
You are connected to held call
CALL WAITING
To answer a call waiting tone
1 Complete present call and hang up
Receive ringing from waiting call (1 - internal,
2 - outside, 3 - priority)
2 Pick up and answer
[dial tone]
[ ]
[dial tone]
[ ]
4
Need help?
Do you have a question about the Definity 8101 and is the answer not in the manual?
Questions and answers