GE FiVe Technical Publication page 13

g
GE Vingmed Ultrasound
Monitor cables
Figure 9 showing the rear end of the monitor. Secure the monitor to the pedestal by using FA307626 Lock
for Eizo and 0801060 Nut lock as shown in figure 8. Mount the ground connection between the monitor
and the system. The ground connection is located under the monitor, at the rear end. Then mount the
cables from the system on to the monitor.
Place the FC307118 EIZO cable lock at the monitor rear end as shown in figure 10. Use 2 self-tapping
plate screws 080A359B to fasten the cable lock.
10 December 2002
Figure 9
Figure 10
FC209267 rev. 02
Monitor Replacement Complete, S5 / V5
Plate screw
080A359B
Page 13 of 14
Pedestal