Odorox Slimline Owner's Manual page 14

WALL MOUNT-INSTALLATION
STEP 16: Re-install optic reflection plate.
STEP 17: Connect the speed control/cover by means of the 'quick connect' that was disconnected in Step 3.
Connectors are keyed and only fit in one direction. Re-install cover by first latching the top behind the
back panel. Gently lower the bottom of the cover until all four screw holes line up. Secure cover with
four screws removed in Step 2. Maintain pressure on cover while installing four screws to avoid cross-
threading.
STEP 18: Turn on electrical service.
STEP 19: Turn on Slimline
TM
12
Owner's Manual
Hydroxyl Generator and set for desired airflow.