Odorox Slimline Owner's Manual page 11

STEP 4: Remove optic reflection plate.
STEP 5: Remove lamp optic following these instructions:
Caution: Use clean leather gloves and eye protection when
handling the optics in this generator
• Hold lamp base with one hand, and lamp connector with other hand.
• Gently 'wiggle' connector while pulling from lamp base.
• Gently pull lamp from three lamp supports.
• DO NOT put any pressure on side of lamp with no support.
• Temporarily store lamp in a safe, clean location.
WALL-MOUNT INSTALLATION
Odorox Slimline
® TM
9